采用濃縮性全合成油，能有效地降低温度，沸点高。 

爱蔻發動機环保冷卻由美國ubrizol-AKO、美國陶氏公司提供原料原料及技術支持，紮根中國汽車養護用品研發一級學府--華南理工大學化工系，精心研發而成！

爱蔻發動機环保冷卻油

品牌：AKO爱蔻

系統：冷卻系統

爱蔻發動機环保冷卻油

産品編号：AKO-115-4L/4L

企業标準：Q/YK 046-2011

産品僅供4S店使用

本品采用高沸点结合高效的(de)抗泡配方，並參考德國國家實验室冷卻劑抗腐技術，由高級多元醇，抗氧劑，防气蚀劑等多種添加劑精制而成

産品特性：

1、沸点高 、冰点低 ；（工作温度-60℃ ～180℃）， 不结冰耐嚴寒 ，徹底消除 “開鍋”烦惱，热車可随时打開水箱蓋。

2、無铁鏽、無水垢、無腐蚀、無气蚀、無蒸發，無壓力。 延长了(le)發動機部件的(de)使用壽命，減少维修和更換。

3、有效的(de)改善和平衡了(le)發動機的(de)温度，減少了(le)發動機的(de)磨損，提升發動機性能。

4、縮短發動機起動时升至正常温度的(de)时間，降低發動機噪音，減少废气排放。

5、消除汽缸顶部“过热顶点”現象，防自燃、防爆震。 增加扭矩， 增強動力、 降低油耗 。

6、高品質産品，一次加注，經久耐用，使用壽命超过50万公里，真正無需更換的(de)冷卻油。使用方法：

1、施工对象：新車、磨合期後的(de)車

2、施工操作流程：

（1）、車輛進入工位後打開暖風，对發動機進行常規檢查：發動機水温、故障燈、暖風情況、冷卻系統檢漏。（如有滲漏维修後再操作）

（2）、擰開放水開關或拆開下水管，把原車冷卻水放掉，擰緊放水開關或裝好下水管。

（3）、等發動機降温後往水箱里加進清水，起動發動機讓冷卻系統進行清洗，清洗过程加油門讓节温器打開（不開空調时風扇轉動）

（4）、清洗完成後擰開放水開關把水放掉，拆開上、下水管，暖風管、中缸放水螺丝、副水箱（若螺丝太緊建議不拆），有双空調的(de)車型，還需拆除後排暖風管。

（5）、等發動機降温後用清水清洗整个冷卻系統一遍，如水箱、缸休、暖風箱、副水箱等。

（6）、用AKO專業風槍把冷卻系統的(de)水吹干淨。吹水流程：（1）吹干淨水箱內的(de)冷卻水。（2）吹干淨缸體內的(de)的(de)冷卻水。（3）吹干淨暖水箱內的(de)冷卻水（保證出水管無水珠則可）。

（7）往中缸加注500毫升爱蔻除水劑，用風吹出来（用杯接住），用测水儀测含水量（须测3次以上）儀器刻度达53以上，再把缸休中的(de)除水劑吹干淨。

（8）、擰緊放水開關，裝上上、下水管、暖風管、中缸放水螺丝（注：留一条位置高的(de)管不裝，加注無水冷卻油时讓它排空气），清洗吹干後裝上副水箱。

（9）、往水箱里添加無水冷卻油，添加过程用手指捏上下水管進行排空（如該車型有放空螺丝則擰開螺丝進行排空），當水箱里的(de)冷卻油加滿时，起動發動機踩油門讓节温器打開（加速到2500轉/分，密切留意水温變化及管道狀況）。

（10）、再往水箱及副水箱添加無水冷卻油直到标準液面，擰上水箱蓋道路試車，路試後打開水箱蓋测無水冷卻油中的(de)水含量，儀器刻度达53以上，並檢查無水冷卻液的(de)液面高度（不夠时添加到标準液面）。

（11）、檢查各水管有沒漏水，冷卻系統是否正常，在水箱蓋和車尾貼上AKO發動機环保冷卻油警告标志，以免再次加入傳統冷卻液和水。

注意事項：

（1）、換了(le)AKO發動機环保冷卻油之後不能添加水或其他冷卻液，以免影響産品的(de)最佳性能發揮。

（2）、行車时發現冷卻液不夠發動機温度偏高，这时車上沒有AKO冷卻油，則可以添加一些純淨水先解燃眉之急，然後有条件时再把冷卻液徹底更換成AKO冷卻油，恢複原車性能。

Engine environmentally friendly cooling oil

Product features:

1, high boiling point ℃, and eliminate the "KaiGuo" worry; Realize the cooling system under pressure of high temperature without cooling;

2, low freezing point-60 ℃, not icy cold resistance;

3, no scale, no corrosion, no evaporation, extended the engine cooling components used in life, reduce maintenance and replacement;

4, derusting, in addition to scale, clean engine cooling system;

5, improve and balance the engine temperature, reduce the engine wear;

6, shorten the engine start to normal temperature of time, reduce the waste gas pollution;

7, improve the power, increase the torque, reduce oil consumption, reduce the pollution;

8, practice proves optimal way engine cooling oil environmental protection service life more than kilometers, still effective, and can be duplicated.

Method of use:

1, construction condition:

A, km above the vehicles, before construction must use AKO cooling system treatment of cooling system for A thorough cleaning.

B, a new car or a 30000 km on the following vehicles are not clean.

2, operation process:

(1), prepare the cooling system treatment.

(2), open water tank cover the detergent directly into water tank, starting engine clean 10 minutes, the cleaning process must let go door WenQi Open Day.

(3), cleaning after the completion of the shut down engine, twist the open water switch, the cooling water drop.

(4), Water switch on

(5) the water on the switch, and went to inclAKOe water tank, starting engine clean 3-5 minutes, cleaning process must let's day WenQi open

(6), cleaning after the completion of the open water switch to twist water, dismantle,hoses, warm wind tube (has a double air conditioning models, still to be removed in the warm wind tube)

(7), with the professional FengQiang AKO cooling system of water blow clean.

Blow water flow:

(1) the blow of filtered water cooling water.

(2) clean the cylinder of the blow cooling water.

(3) blow clean water tank warming of the cooling water (blew warm water tank, need to open the warm wind, temperature moves to switch the biggest)

(8), the water on the switch, pack up and, hoses, warm wind tube.

(9), tear open next vice water tank, cleaning loaded on vice water tank.

(10), to add the water tank no water cooling oil, add process using fingers are emptying and conduit (such as the model, the vent screw is a twist screws are emptying), when the cooling in the water tank filled with oil, starting the engine accelerator let's day WenQi open, to add cooling water tank and vice water tank oil until standard liquid surface.

(11), screw in water tank cover road test, and the road test must open the water tank cover without water cooling fluid check liquid surface height, when not added to the standard liquid surface.

(12), check the water pipes have no leak, the system is normal or not, in the water tank cover and the AKO engine cooling oil with environmental protection warning signs, lest again to join the traditional cooling fluid and water.

Note:

(1), changed the AKO engine cooling oil environmental protection after can not add water or other liquid cooling, lest affect the product's best performance.

(2), driving found cooling fluid enough engine temperature on the high side, then the car without AKO cooling oil, can add some water first the solution is having some trouble, then conditional when put cooling fluid replacement thoroughly into AKO cooling oil, restore the original car performance.